PI2EQX510T 1.2v 5.0gbps, 1-channel, usb3.0 redriver? block diagram application diagram tablet pc usb 3.0 cable pericom usb3.0 redriver digital camera external storage device pericom usb3.0 redriver smart phone pericom usb3.0 redriver features rxp cml cm l limiting a mp e qualizer s ignal detection p ower management rxn txp txn eq ? ? usb 3.0 compatible ? ? full compliancy to usb 3.0 super speed standard ? ? one 5.0gbps differential signal pairs ? ? adjustable receiver equalization ? ? 100 ? differential cml i/os ? ? pin configured output emphasis control ? ? input signal level detect and squelch function ? ? automatic receiver detect ? ? low power : ~75mw ? ? auto "slumber" mode for adaptive power management ? ? single supply voltage: 1.2v pericom semiconductors PI2EQX510T is a low power, high performance 5.0 gbps signal redriver? designed specifically for the usb 3.0 protocol. the device provides programmable equalization and de-emphasis to optimize performance over a variety of physical mediums by reducing inter-symbol interfer - ence. PI2EQX510T supports one 100ohm differential cml data signals between usb3.0 host and end point device, over cable, or to extend the signals across other distant data pathways on the users platform. the integrated equalization circuitry pro - vides flexibility with signal integrity of the signal before the re - driver. a low-level input signal detection and output squelch function is provided. the channels input signal level deter - mines whether the output is active. the PI2EQX510T also includes a receiver detect function. the receiver detection loop will be active again if the cor - responding channels signal detector is idle for longer than 7. 3 m s . the channel will then move to unplug mode if load not de - tected, or it will return to low power mode (slumber mode) due to inactivity. product databrief new product brief www.pericom.com | 1-408-232-9100
|
